Cylinder accessories

Material is QT450

After each shift is off duty the production manufacturing of abrasive tools on duty are completed, the abrasive tools shall be removed with thin cloth. If the abrasives are found to be damaged, it shall be reported to the supervisor first the supervisor shall solve the problem. clean up the wax press, special tools on the spot to ensure clean neat.

common problem

When the bucket tooth casting plant suppresses the wax mold, it is necessary to carry out the first sample inspection, the actual operation can be carried out after the price of the precision casting reaches the standard. The main parameters of inhibition can be changed randomly in the whole process of inhibition.

When using new abrasives, try to make clear the order of assembly disassembly of abrasives, the removal method of wax mold.

When storing wax mould, pay attention to the idle position to avoid deformation. If necessary, the pipe buckle other measures can be adopted to prevent the wax mold deformation.

Make 2-3 shrinkage test pieces (such as 0100x6mm cake test pieces) for each shift, measure the shrinkage after refrigeration, make records.

Discharge the residual wax in the wax tank before work. The waste wax mold waste wax shall be kept clean, put into the waste wax box sent to the wax solution department immediately.

When the wax press is working, it is forbidden to use the hand to hold the tractor abrasive to close the hand under the cabinet table, it is forbidden to press the button in one hand mode to avoid life safety accidents.

The safety fire prevention work should be done well in the wax mould room.